Langsung ke konten utama
Percobaan 7
Lampu flip flop
Anggota kelompok:
Nama : Hadi pri prasetyo                 NIM : 153600061
Nama : Agus dwi prasetyono           NIM :153600008


Tujuan :menampilkan lampu flip flom
Program:
int led=2;
void setup() {
 pinMode(led,OUTPUT);
}

void loop() {
 digitalWrite(led,HIGH);
 delay(1000);
 digitalWrite(led,LOW);
 delay(1000);// put your main code here, to run repeatedly:
}


Proyek:

Komentar

Posting Komentar

Postingan populer dari blog ini

Percobaan 9 Membuat not lagu Anggota kelompok: Nama: Hadi pri prasetyo .............NIM: 153600061 Nama: Agus dwi prasety o...........NIM: 153600008 Tujuan: Mengeluarkan not lagu balonku ada 5 Program: void setup() {   pinMode(8,OUTPUT);   } void loop() {   noTone(8);   delay(1000);   tone(8,330,200);   delay(200);   noTone(8);   tone(8,704,200);   delay(200);   noTone(8);   tone(8,396,200);   delay(200);   noTone(8);   tone(8,264,200);   delay(200);   noTone(8);   tone(8,396,200);   delay(200);   noTone(8);   tone(8,660,200);   delay(200);   noTone(8);   tone(8,792,200);   delay(200);   noTone(8);   tone(8,264,200);   delay(200);   noTone(8);   tone(8,660,200);   delay(200);   noTone(8);   tone(8,704,200);   delay(200);   noTone(8);   tone(8,297,200);   de...
Posting Komentar
Baca selengkapnya
Percobaan 19 . Motor servo Anggota kelompok : Nama :hadi pri prasetyo............NIM :153600061 Nama :Agus dwi prasetyono.....NIM :153600008 Tujuan : menampilkan motor servo Program include <Servo.servo1> Servo servo1;  // create servo object to control a servo // twelve servo objects can be created on most boards int pos = 0;    // variable to store the servo position void setup() {   servo1.attach(9);  // attaches the servo on pin 9 to the servo object } void loop() {   for (pos = 0; pos <= 180; pos += 1) { // goes from 0 degrees to 180 degrees     // in steps of 1 degree     servo1.write(pos);              // tell servo to go to position in variable 'pos'     delay(15);     servo1.write(90);}   for (pos = 180; pos >= 0; pos -= 1) { // goes from 180 degrees to 0 degrees     servo1.write(pos);         ...
Posting Komentar
Baca selengkapnya